Sliding Marker Boards

Horizontal Sliding Units, Manually and Motor-Operated Vertical Sliding Units and Thinline Vertical Sliding Units are available.

Standard Horizontal Sliding Unit including two, three or four 1/2" thick sliding panels, on two, three or four tracks, with a fixed back panel.

Standard Vertical Unit

Heavy-duty panels operate over ball bearing neoprene rollers. Sliding panels (1, 2, or 3) are 7/8" thick; two panel housing is 6-1/2" deep; aluminum face is 4" wide. Recommended for heavy use areas

Standard Size -	• Max. height of panel - up to 4'0" • Standard lengths - 4', 5', 6', 8', 10', 12', 14', 16' • Floor mounted verticals are typically 10'0" high. • Wall mounted verticals are typically 8'0" high.
Sliding Panels -	• constructed with honeycomb core, and are equipped  with ball bearing rollers for elimination of side motion and noise, plus, ball  bearing neoprene end rollers for effortless movement of panels. • Panels are counter-balanced and all cables rotate around one central pulley  to eliminate racking.

Standard Thinline Unit

Panels in the economical Thinline unit are 1/2" thick and operate over roller bearing sheaves in channel guides. Two panel housing is 4-7/8" deep; aluminum face is 2-5/8" wide.

Standard Size -	• Max. height of panel - up to 4'0" • Standard lengths - 4', 5', 6', 8', 10', 12' • Floor mounted verticals are typically 10'0" high. • Wall mounted verticals are typically 8'0" high.
Sliding Panels -	• One, two, or three sliding panels Available in:• LCS Porcelain Enamel Steel Markerboard, Vitracite Porcelain Enamel Steel Chalkboard

Contact Bgeco for product information and prices

 I   Home   I  Products  I Contact Us I

Copyright © (Bgeco) rights reserved.

 - Bowling Green Equipment Company Inc. - Toll Free 1-800-552-2969 - Fax 888-352-7427 - E-mail sales@bgeco.com -